is our highest quality water-based
generator is well suited to applications where continuous,
output is required with low fluid consumption.
There is no compromise in the quality of components in this unit.
It generates the most persistent water-based smoke of any smoke
machine available, and can also be set to use quick dispersing
smoke fluid for installations.
spray booth clearance testing
air flow visualisation
Able to produce high quality smoke continuously
at maximum output.
Variable output flow control (0 -> 100%)
Can produce persistent smoke (Fluid A),
(Fluid B) or medium dispersing smoke (Fluid C) as required.
Efficient fluid use (50ml per minute, 100%
Three types of fluid available
for use in the Dragon:
Smoke Hang Time (at 20C, approx)
1.5 hours +
1 - 3 minutes
heat exchanger which has a lifetime guarantee
Digital temperature control and monitoring
Integral 2 litre fluid reservoir, with
Solid state switching
High quality pump, truly
100% continuous rating
Supplied with 5 metre wired
We ship worldwide
Made entirely in Britain under
Smoke particle size using Dragon Fluid
A (very persistent) is the smallest in the industry at just 0.2
- 0.3 microns (compared to an average of 1 - 5 for typical 'entertainment'
"We love the machines and are very impressed
We have two machines and they get used very heavily every week
for ship board, stuctural, confined space and rescue training.
The smoke produced by them is awesome." Elk Grove Fire Dept, California
Its beautifully made,
works well and from what we have seen here makes extremely efficient
use of the fluid. Fire Professional Magazine
Size (L x W
55cm x 23cm
(21.5" x 9" x 11.5")
Heat exchanger wattage
(optional 110v, 50/60hz)
Warm up time from cold
Duration of full 2 litre (½
gallon) fluid tank at 100% output
(50ml per minute)
0 - 720m3 / min.
(25,500 cu. ft.)
Particle size (mass
0.2 - 0.3 micron
The DRAGON is in daily use in fire
training centres, universities, building sites, theme parks, power
stations, super yachts, navy ships, art installations, wind tunnels
and spray booths all over the world.
Wireless remote control option
FM, up to 150m range (line of sight)
How does the
DRAGON differ from other water based smoke machines?
Continuous & constant 100% high output - fog output does
not 'ramp down' to maintain continuous fog like on most machines.
The DRAGON maintains full smoke output volume, continuously,
non-stop, without ramping down flow.
All components have been chosen for quality and reliability.
The heat exchanger is guaranteed for life and the pump is truly
100% continuously rated.
Sub-micron particle size (consistently 0.2 micron) using
fluid A is the smallest of any fog machine in the world.
This means low fluid consumption, long hang time (Fluid A) for
thick fog and no discernible residue.
Each PS27 Dragon
unit comes complete with a 5 metre wired remote control
and a 2.5 litre container of smoke fluid.
A 'de-rated' version of the 110v unit is also available
for US customers who want to connect it to a standard domestic
US mains socket. The unit draws 1.7kW (16A) instead of 2.2kW
Specification as above except internal fluid tank references.
The PS27ER version of the Dragon comes with an external fluid
pumping inlet and 5 metre fluid pipe which allows for the remote
location of the (supplied) 25 litre fluid tank.
Ideally suited for installations in theme parks, museums, art
installations, galleries, etc. where low/zero maintenance is required.
An automatic compressed air-line purge facility is also available
as an optional extra which auto-purges the heater block after
each smoke issue.